EasyManua.ls Logo

GUDEL FlexxPump 402 - Storage Conditions

Default Icon
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9.2 Storage conditions
CAUTION
Leaking batteries
Battery fluids and their fumes are hazardous to the environment, corrosive
and poisonous! They cause injury to persons and damage to property!
Observe the following points:
Make sure there is good ventilation in closed rooms before repairing leaks
Wear safety goggles and gloves
Prevent battery fluids from getting into the drinking water supply
Use only dry cleaning cloths without detergents
Dispose of batteries in an environmentally friendly manner
CAUTION
Leaking fluids
During storage, substances that are hazardous to the environment can leak!
Hazardous substances must be prevented from entering the drinking water
supply. Take appropriate measures
Observe the country-specific safety data sheets
Oils and greases must be disposed of as hazardous waste, even if the total
quantity is small
Room
Store the product in a dry location. For information on the required space
and the floor capacity, refer to the layout. Use a covering to protect the
product against dust and dirt.
Temperature
The ambient temperature must remain between -10 and +40 °C. Make sure
that the product is not subjected to great temperature fluctuations.
Air humidity
The air humidity must be below 75%.
Decommissioning, storage
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_EN-US
112

Table of Contents

Related product manuals