4.2 Function
4.2.1 Functional description
The automatic lubrication system is a lubrication system for Güdel compo-
nents. The FlexxPump feeds the lubricant from the cartridge into the lines.
Depending on the design, the lubricant is distributed through splitters, com-
bined through Y-segments, or distributed directly to the lubrication area.
Rack and pinions are lubricated by lubricating pinions; guideways are lubri-
cated by lubricating elements.
The FlexxPump outputs a signal in case of overpressure, if the cartridge is
empty and for each piston stroke. This makes it possible to process such in-
formation further.
4.2.2 FlexxPump
4.2.2.1 402
An external power source feeds the FlexxPump. The magnetic peg controls
the supply of lubricant. If the FlexxPump is connected to a PLC, it emits a sig-
nal in case of malfunction. The type of error is shown on the display.
4.2.2.2 402B
A battery feeds the FlexxPump. The magnetic peg controls the supply of lubri-
cant. If there is a malfunction, the type of error is shown on the display.
Design, function
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_EN-US
38
To Next Page
Loading...