GUDEL FlexxPump 402 - Equipment

5.3.4 Connecting electrical equipment
WARNING
Faulty cabling
The available mains voltage (supply voltage) has to match the specifications
on the rating plate. A faultily connected product can cause material damage,
or serious or even fatal injuries.
• Check the deviation of the electrical circuit.
• Use only fuses with specified amperage.
• Wire the plug according to the diagram.
NOTE
Material damage
Closing hydraulic outputs creates an overpressure. The overpressure can
cause damage to the product.
• Do not close any hydraulic outputs
Commissioning
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_EN-US
51