Declaration of EG conformity
according to the Machinery Directive 2006/42/EG of 2006, May 17th
Herewith the manufacturer
TriboServ GmbH & Co. KG, Gelthari-Ring 3, D-97505 Geldersheim,
declare that the following lubricating systems
FlexxPump 401, 402 and FlexxPump 401 M, 402 M
as well as FlexxPump 501, 502 and FlexxPump 501 M, 502 M
delivered by us, concerning design and construction as well as the model put into circulation,
comply with the EG directives 2006/42/EG.
In particular, the following harmonized standards were applied:
EN 12100:2011 Safety of machinery
according the EG directive on Electromagnetic Compatibility 2004/108/EG
The manufacturer herewith declares that the following lubricating systems
FlexxPump 401, 402 and FlexxPump 401 M, 402 M
as well as FlexxPump 501, 502 and FlexxPump 501 M, 502 M
delivered by us, concerning design and construction as well as the model put into circulation,
comply with the above mentioned EG directive.
In particular, the following harmonized standards were applied:
EN 61000-6-2, EN 61000-6-4 Elektromagnetic Compability (EMC).
Authorized representative for the compilation of technical documentation:
Dr.-Ing. Michael Weigand
General Manager
TriboServ GmbH & Co. KG
Gelthari-Ring 3
D-97505 Geldersheim
Geldersheim, 12.01.2018
Dr.-Ing. Michael Weigand, General Manager
TriboServ GmbH & Co. KG
Gelthari-Ring 3, D-97505 Geldersheim
Telefon +49 (0) 9721 -47396 - 60
Telefax +49 (0) 9721 -47396 - 69
www.triboserv.de
To Next Page
Loading...