2. Press the Down key and the
Right key twice. The IP
selection display appears.
Note: The IP address can only
be edited if DHCP is off.
3. Press the Down key. The IP
address selection appears.
The IP address is divided in 4 groups;
IP1:IP2:IP3:IP4. The cursor will be flashing on IP1
(indicated by ―X‖).
4. Use the Left/Right keys to
move the cursor to the IP1 value
and select a digit.
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto IP2.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
