SHIFT → REL
(RELative base)
Manually sets the reference value for
the Relative value measurement
(page 62).
Measures the Maximum or the
Minimum value (page 61).
Selects the digital filter type for the
signal sampling (page 79).
As the 2nd key, selects the
measurement item on the 2nd
display (page 49). Pressing and
holding for more than 1 second
turns off the 2nd display.
As the Local key, releases the remote
control and returns the instrument
to local panel operation (page 132).
Enters the configuration mode for;
System Settings, Measurement
Settings, ADC Settings,
Frequency/Period Settings, I/O
Settings, TX TERM Settings and
Scanner Settings.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
