MEASure:FRESistance?
Returns the 4W resistance measurement on the first display.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF),Resolution(<NRf>|
MIN | MAX | DEF)]
Example: MEAS:FRES?
> +1.181372E+6
Returns the 4W measurement.
MEASure:FREQuency?
Returns the frequency measurement on the first display.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF),Resolution(<NRf>|
MIN | MAX | DEF)]
Example: MEAS:FREQ?
> +0.215029E+5
Returns the frequency (21.5 kHz).
MEASure:PERiod?
Returns the period measurement on the first display.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF),Resolution(<NRf>|
MIN | MAX | DEF)]
Example: MEAS:PER? MAX
Returns the period at the maximum range.
MEASure:CONTinuity?
Returns the continuity measurement on the first display.
Example: MEAS:CONT?
Returns the continuity.
MEASure:DIODe?
Returns the diode measurement on the first display.
Example: MEAS:DIOD?
Returns the diode measurement.
MEASure:TEMPerature:TCOuple?
Returns the temperature for the selected thermocouple type on the first
display.
Parameter:[NONE] | B | E | J | K | N | R | S | T
Example: MEAS:TEMP:TCO? J
> +0.26348E+2
Returns the temperature.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
