GW Instek GDM-8261A - Page 187

REMOTE CONTROL
187
[SENSe:]CURRent:DETect?
Returns the auto-detect status for the current functions.
Return Parameter: 0|1 1=ON, 0=OFF
[SENSe:]DIGital:SHIFt
Sets the Digital Shift function on or off.
Parameter: ON | OFF
Example: SENS:DIG:SHIF ON
Turn the digital shift function on.
[SENSe:]DIGital:SHIFt?
Returns the Digital Shift function status.
Return Parameter: 0|1 1=ON, 0=OFF
[SENSe:]UNIT
Sets the temperature unit.
Parameter: C|F
Example: SENS:UNIT C
Sets the temperature unit to ˚C.
[SENSe:]UNIT?
Returns the temperature unit.
[SENSe:]FUNCtion[1/2]?
Returns the function displayed on the first or second display.
Return parameter:
(display 1): VOLT, VOLT:AC, CURR, CURR:AC, RES, FRES, FREQ, PER,
TEMP:RTD, TEMP:FRTD, TEMP:TCO, DIOD, CONT
(display 2): VOLT, VOLT:AC, CURR, CURR:AC, RES, FRES, FREQ, PER, NON
[SENSe:]FUNCtion[1/2]
Sets the function for the first or second display.
Parameter:
(display1):"VOLT[:DC]", "VOLT:AC", "CURR[:DC]", "CURR:AC", "RES",
"FRES", "FREQ", "PER", "TEMP:RTD", "TEMP:FRTD", "TEMP:TCO",
"DIOD", "CONT"
(display2): "VOLT[:DC]", "VOLT:AC", "CURR[:DC]", "CURR:AC", "RES",
"FRES", "FREQ", "PER", "NON"
Example: SENS:FUNC1 "VOLT:DC"
Sets the 1
st
display to the DCV function.
[SENSe:]VOLTage:DC:RANGe
Sets the DC Voltage measurement range.
Parameter: (<NRf> | MIN | MAX)
Example: SENS:VOLT:DC:RANG MIN
Set the DC voltage range to lowest range allowed.
www. .com
information@itm.com1.800.561.8187