[SENSe:]FRESistance:RANGe
Sets the 4W resistance measurement range.
Parameter: Range(<NRf> | MIN | MAX)
Example: SENS:FRES:RANG 1000
Sets the 4W resistance range to 1kΩ.
[SENSe:]FRESistance:RANGe?
Returns the 4W resistance measurement range.
Parameter: [None] | [MIN | MAX]
[SENSe:]FREQuency:VOLTage:RANGe
Sets the frequency measurement range.
Parameter: Range(<NRf> | MIN | MAX)
Example: SENS:FREQ:VOLT:RANG MIN
Sets the frequency to the minimum frequency range.
[SENSe:]FREQuency:VOLTage:RANGe?
Returns the frequency measurement range.
Parameter: [None] | [MIN | MAX]
[SENSe:]PERiod:VOLTage:RANGe
Sets the period measurement range.
Parameter: Range(<NRf> | MIN | MAX)
Example: SENS:PER:VOLT:RANG MIN
Sets the period to the minimum range.
[SENSe:]PERiod:VOLTage:RANGe?
Returns the period measurement range.
Return parameter: [None] | [MIN | MAX]
[SENSe:]VOLTage:DC:RANGe:AUTO
Sets the DC voltage Auto range on/off.
Parameter: ON | OFF
Example: SENS:VOLT:DC:RANG:AUTO ON
Turns Auto-range on for DC voltage measurements.
[SENSe:]VOLTage:DC:RANGe:AUTO?
Returns the DC voltage Auto-range settings.
Return parameter: 0|1, 0=OFF, 1=ON
[SENSe:]VOLTage:AC:RANGe:AUTO
Sets the AC voltage Auto range on/off.
Parameter: ON|OFF
Example: SENS:VOLT:AC:RANG:AUTO ON
Turns Auto-range on for AC voltage measurements.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
