3. Press the Enter key to confirm
editing and to start
measurement.
Shows the current count
number/measurement
Indicates the count measurement mode.
Press the 2nd key to cycle through
the different statistical data
measurements.
Indicates the current measurement
count
Indicates the minimum data value
Indicates the maximum data value
Indicates the mean (average) value
Indicates the standard deviation of the
data
Press the SHIFT key for 2 seconds
to stop or restart measuring.
Indicates the measurement has started
Indicates the measurement has stopped
Press the SHIFT key and the 2/4W
key to exit.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
