GW Instek MSO-2000EA - Page 131

ADVANCED CONFIGURATION
131
Define Inputs
5. Press Define Inputs from the lower
menu.
6. From the side menu choose the
SCLK, SS, MOSI and MISO inputs.
SCLK
CH1~CH4 or D0~D15 *
SS
CH1~CH4 or D0~D15 *
MOSI
OFF, CH1~CH4 or OFF, D0~D15 *
MISO
OFF, CH1~CH4 or OFF, D0~D15 *
*Depending on your choice at step 4 above.
Configuration
The Configure menu sets the data line logic level,
SCLK edge polarity, word size and bit order.
7. Press Configure from the bottom
menu.
8. From the side menu select SCLK edge, SS logic
level, word Size and Bit order.
SCLK
rising edge , falling edge
SS
Active High, Active Low
Word Size
4 ~ 32 bits
Bit Order
MS First, LS First