GW Instek MSO-2000EA - Using Advanced Delay Trigger

ADVANCED CONFIGURATION
161
10. Set the external trigger level using
the side menu.
Analog
channel
Range
00.0V~ 5 screen divisions
Set to TTL 1.4V
Set to ECL -1.3V
Set to 50%
Digital
channel
Range
-5.00V~ +5.00V
TTL 1.4V
5.0V CMOS 2.5V
3.3V CMOS 1.65V
2.5V CMOS 1.25V
ECL -1.3V
PECL 3.7V
0V 0V
Note
Setting the trigger level for a digital source will
also change the threshold levels set in the Logic
Analyzer menu (page 214).
Using Advanced Delay Trigger
Panel Operation
1. Set the edge trigger source. This
will set the initializing trigger for
the delay source.
Page 159
2. Press the trigger Menu key.
Menu
3. Press Type from the lower bezel
menu.