GW Instek MSO-2000EA - Introduction; Overview

MSO-2000E & 2000EA User Manual
256
Introduction
Overview
Background
The Application (APP) function allows different
software applications to be run. The MSO-
2000E/2000EA comes pre-installed with a number
of apps, as described below. Please see your local
GW Instek distributor for the latest information on
new apps.
Included
Applications
Go/No-Go
The Go/No-Go application can be
used to set threshold boundaries
for input signals. Go/No-Go tests
to see if a waveform will fit inside
a user-specified maximum and
minimum amplitude boundary
(template).
DVM
The DVM application displays a
digital voltage meter readout that
floats on the top left-hand side of
the screen.
Data Log
The Data Log app will log
waveform data and/or
screenshots at set intervals for set
duration of time.
Digital Filter
Adds a digital low or high filter to
any of the input channels. Each
filter can have a user-defined
cutoff frequency set.
Mask
Create shape templates for signal
comparison.