GW Instek MSO-2000EA - Adding Labels to Digital Channels or the Analog Waveform

LOGIC ANALYZER
217
Set Vertical Scale
6. Press Vertical until the X scale
parameter is highlighted. Use the
Variable knob to set the scale.
Edit Labels
7. Press Edit Labels to edit the label
for the currently selected analog
waveform. See below for details.
Note
Only one analog waveform can be displayed at a time.
Adding Labels to Digital Channels or the Analog Waveform
Background
Digital labels can be added to each digital channel
or to one of the analog waveforms.
Panel Operation
1. To edit labels for the digital
channels, press the Edit Labels soft-
key from the D15~D0 On/Off
menu.
To edit labels for the analog
waveforms, press the Edit Labels
soft-key from the Analog Waveform
menu.
2. Press Label For and select a digital
channel. An analog waveform
cannot be chosen. The currently
active analog waveform will be
displayed for reference.
Label For
D0~D15
A1, A2
3. To choose a preset label, Press User
Preset from the side menu and
choose a label.