GW Instek MSO-2000EA - Display All Mode

MSO-2000E & 2000EA User Manual
56
3. Choose one of the gating modes
from the side menu: Off (full
record), Screen, Between Cursors.
Cursors On
Screen
If Between Cursors is selected, the
cursor positions can be edited by
using the cursor menu.
Page 63
Display All mode
Display All mode shows and updates all items from Voltage and
Time type measurements.
View
Measurement
Results
1. Press the Measure key.
Measure
2. Press Display All from the bottom
menu.
3. Press Source from the side menu
and choose a measurement source.
Range
CH1~CH4, Math, D0~D15
4. The results of Voltage and Time type
measurements appear on the display.