SAVE/RECALL
303
Reference Waveforms
Recall and Display Reference Waveforms
A reference waveform must be stored in advance.
See page 292 to store waveforms as reference
waveforms.
1. Press the REF key on the front
panel.
2. Pressing R1~R4 repeatedly will
toggle the corresponding reference
waveform OFF/ON.
Turning R1~R4 ON will open the
corresponding reference menu.
3. If a reference waveform is ON but
not active, its reference menu can
be opened by pressing the
corresponding R1~R4 key from the
bottom menu.
To Next Page
Loading...
