GW Instek MSO-2000EA - Display

MSO-2000E & 2000EA User Manual
26
Display
Below is a general description of the main display. As the display
changes while activating the different functions of the MSO-
2000E/2000EA, please refer to each function sub-chapters of this
user manual for more details.
Memory
bar
Reference
waveform
Analog
Waveform
Bus
decoding
Channel status Horizontal status
Trigger
configuration
Waveform
frequency
Date and time
Trigger
position
Trigger status
Acquistion
mode
Trigger level
Channel
Indicators
Memory length
and sample rate
Digital channels
Analog
Waveforms
Shows the analog input signal waveforms.
Channel 1: Yellow
Channel 2: Blue
Channel 3: Pink
Channel 4: Green
Bus decoding
Shows serial bus data decoding. The values are
displayed in hex or binary.
Reference
waveform
Reference waveform(s) can be displayed for
reference, comparison or other operations.
Digital channels
Show the digital channels. Up to 16 channels can
be displayed (Digital channel 0 to 15).
Channel
Indicators
The channel indicators for each activated channels
are located at the zero volt level of each signals.
Any active channel is shown with a solid color.
Example:
Analog channel indicator
Digital channel indicator