GW Instek MSO-2000EA - Coupling and Tracking Waveforms Settings

ARBITRARY WAVE GENERATOR
251
After Save Now has been pressed the file will be
saved.
Note
The file will not be saved if the power
is turned off or the USB drive is taken
out before the message ends.
File Utility
Alternatively, to edit the internal
memory or the USB flash drive
contents (create/ delete/rename files
and folders) or to edit the default file
path, press File Utilities from the side
menu. See the user manual for details
Coupling and tracking waveforms settings
Background
GEN1 and GEN2 waveforms can be coupled in
terms of frequency and/or amplitude. Similarly,
waveform settings can also be tracked and be
duplicated from one waveform to the other.
Panel Operation
1. From the bottom menu of the AWG menu:
Press UTIL to enter the Utility
menu.
You can press on the Preset button
from the side menu to reset both
wave generators to a 0V DC
waveform.
2. Press Dual Chan from the side
menu to enter the coupling and
tracking menus.