LOGIC ANALYZER
205
Logic Analyzer Operation
Overview
The logic analyzer inputs can be used to measure
discrete inputs or can be used to measure values
on a parallel or serial bus.
The logic analyzer has a sample rate of 1GSa/s
with a bandwidth of 200MHz.
Supported Logic
Thresholds
TTL, CMOS,
ECL, PELC,
User- defined
The MSO-2000E/2000EA supports
common logic thresholds and
supports user-defined thresholds
of ± 5V if the in-built threshold
levels are unsuitable.
Edge, Pulse
Width, Timeout,
Bus, Logic
As standard, the digital channels
support basic edge, pulse width,
timeout as well as bus and logic
triggers.
To Next Page
Loading...
