GW Instek MSO-2000EA - Bus Decoding; Threshold Configuration

ADVANCED CONFIGURATION
137
Bus Decoding
Background
The bus that is displayed on the screen or in the
event tables can be set to either hex or binary
formats.
Operation
Press Bus Display from the Bus
menu and choose either Hex or
Binary from the side menu.
Threshold configuration
Background
The threshold levels for the Serial or Parallel buses
can be set to either a user-defined threshold level
or to pre-set threshold.
Set the Threshold
1. Press Threshold from the bottom
menu.
2. Press Select from the side menu to
choose one of the lines that are
configured for your type of bus.
UART
Tx, Rx
I
2
C
SCLK, SDA
SPI
SCLK, SS, MOSI, MOSI
Parallel
Clock, bit0, bit1, …
CAN
CAN_H, CAN_L, Tx, Rx
LIN
LIN Input
3. Press Choose Preset to select a pre-
set logic threshold.
Logic Type
Threshold