GW Instek MSO-2000EA - User Defined Mask; Create Mask

MSO-2000E & 2000EA User Manual
274
User Defined Mask / Create Mask
Background
A user-defined mask can be created. Up to 8 areas
of any form, each made of up to 10 points, can be
built out and juxtaposed to each other to form the
user-defined mask pattern.
Step
1. Press the User Define button from
the bottom menu.
2. Press the Edit button from the side
menu.
Create an area
3. Press the Area Number button from the side
menu and use the Variable knob to select 1 out
of 8 areas that can be created to build the mask
pattern and start to shape it.