GW Instek MSO-2000EA - Edit an Existing ARB Waveform

MSO-2000E & 2000EA User Manual
240
5. Press Function to choose
an inbuilt waveform :
Function:
Sine, Square, Pulse, Ramp,
Noise
6. Press OK Create to create the
arbitrary waveform shape.
Edit an Existing ARB Waveform
Background
Use the Edit Existing menu to edit a newly created
waveform and further shape it according to your
requirements. You can also use the Edit Existing
menu for arbitrary waveforms that have been
recalled (see Load Waveform page 247). There are
two main options that can be used to edit
waveforms: Normal Edit and Function Edit.
Editing Methods
Normal Edit:
The Normal Edit function allows you to insert
or delete points at any position on a waveform.
Function Edit:
The Function Edit function allows you to edit
the waveforms in a number of different ways:
 Point/Line: Insert a point or horizontal line
into the ARB waveform.
 Diagonal: Insert a diagonal line
 Scale: Scales the ARB waveform vertically.
 Copy/Paste: Copy or paste a section of the
ARB waveform.
 Clear: Clears a section of the ARB waveform
and replaces it with a 0V DC waveform.