GW Instek MSO-2000EA - Page 239

ARBITRARY WAVE GENERATOR
239
Example
Panel Operation
1. Select an arbitrary waveform from the GEN1
Setup/GEN2 Setup menu:
Press GEN1 Setup or GEN2 Setup
for generator 1 or generator 2,
respectively.
Press Waveform from the bottom
menu.
Select Arbitrary from the side menu.
2. Press the Waveform Edit from the
bottom menu.
3. From the bottom menu select
Create New.
4. Press Initial Points to set the
number of points for the waveform
length.
Initial Points
2 ~ 16384