GW Instek MSO-2000EA - FM Modulation

MSO-2000E & 2000EA User Manual
232
Symmetry
(Ramp wave only)
10. Press Symmetry to set the
symmetry (pulse wave).
Symmetry
0% ~ 100%
Rate
(Noise wave only)
11. Press Rate to set the rate (noise
wave).
Noise
1kHz ~ 10MHz
Exit AM Settings
12. Press Go Back to exit the AM
settings.
FM Modulation
Background
Frequency modulation can be used for either
channel. The carrier wave can only be sine, square
and ramp waveforms. Sine, square, pulse, ramp
and noise can be selected as the modulating
waveform.
Example
Panel Operation
1. Select the carrier waveform from the GEN1
Setup/GEN2 Setup menu: