GW Instek MSO-2000EA - Page 231

ARBITRARY WAVE GENERATOR
231
2. Press the Modulation from the
bottom menu.
3. From the side menu, turn
Modulation on.
4. Press AM to select AM modulation
and to enter the AM modulation
setup menu.
Set the
Modulation
Depth
5. Press Depth to set the modulation
depth.
Depth
0.0% ~ 120.0%
Modulation
Frequency
6. Press AM Freq to set the
modulation frequency.
Frequency
200kHz ~ 1Hz
Shape
7. Press Shape to set the modulating
wave shape.
Shape
Sine, square, pulse, ramp, noise
Phase
(Sine wave only)
8. Press Phase to set the phase of the
modulated wave (sine wave).
Phase
-180.0° ~ 180.0°
Duty Cycle
(Pulse wave only)
9. Press Duty Cycle to set the duty
cycle (pulse wave).
Duty Cycle
1.0% ~ 99.0%