GW Instek MSO-2000EA - AM Modulation

MSO-2000E & 2000EA User Manual
230
AM Modulation
Background
Amplitude modulation can be used for either
channel. All waveforms except Noise and DC can
be used as the carrier wave. Sine, square, pulse,
ramp and noise can be selected as the modulating
waveform.
Example
Panel Operation
1. Select the carrier waveform from the GEN1
Setup/GEN2 Setup menu:
Press GEN1 Setup or GEN2 Setup
for generator 1 or generator 2,
respectively.
Press Waveform from the bottom
menu.
Select the waveform from the side menu. This
will be the carrier wave.
Carrier Waves
Sine, square, pulse, ramp, sinc,
gaussian, Lorentz, exp. rise,
exp. fall, haversine, cardiac.