GW Instek MSO-2000EA - High Low Function

MEASUREMENT
57
Remove
Measurements
To remove the measurement results,
press OFF.
Delay
Measurements
Delay type measurements are not available in this
mode as only one channel is used as the source.
Use the individual measurement mode (page 52)
instead.
Digital channels
Only Frequency, Period, +Width, -Width and Duty
Cycle measurements are supported for the digital
channels D0~D15.
High Low Function
Background
The High-Low function is used to select the
method for determining the value of the High-Low
measurement values.
Auto
Automatically chooses the best
high-low setting for each
waveform when measuring.