GW Instek MSO-2000EA - Measurement on Segments

MSO-2000E & 2000EA User Manual
96
2. Press the Play/Pause key to run
through the acquired segments in
numerical order.
 Press the Play/Pause key again
to pause the playback.
 When the scope has played
through to the last segment,
pressing the Play/Pause key
again will play through each
segment again in reverse order.
Measurement on Segments
Background
The Segmented memory function can be used in
conjunction with the automatic measurements
configured in the Measurement menu (see page
48). Please note that Digital channels
measurements cannot be used in conjunction with
the segmented memory.
Modes
Segments
Measure
This function will either perform
statistics calculations on the
segments or tabulate a list of the
measurement results for all the
segments.
Segments
Info
Provides configuration information
common for all the acquired memory
segments.
Segments
Measure
The Segments Measure function allows you to
view automatic measurements for the segments in
statistical bins or as a list displaying the result of
each automatic measurement.