GW Instek MSO-2000EA - Page 233

ARBITRARY WAVE GENERATOR
233
Press GEN1 Setup or GEN2 Setup
for generator 1 or generator 2,
respectively.
Press Waveform from the bottom
menu.
Select the waveform from the side menu. This
will be the carrier wave.
Carrier Waves
Sine, square, ramp
2. Press the Modulation from the
bottom menu.
3. From the side menu, turn
Modulation on.
4. Press FM to select FM modulation
and to enter the FM modulation
setup menu.
Set the Frequency
Deviation
5. Press Freq Dev to set the frequency
deviation.
Deviation
12.5MHz ~ 0.1Hz
Modulation
Frequency
6. Press FM Freq to set the
modulation frequency.
Frequency
200kHz ~ 1Hz
Shape
7. Press Shape to set the modulating
wave shape.
Shape
Sine, square, pulse, ramp, noise