GW Instek MSO-2000EA - Page 252

MSO-2000E & 2000EA User Manual
252
Tracking settings
3. From the side menu
press Tracking to set
the tracking mode to
ON or OFF.
Tracking:
ON, OFF
When Tracking is ON, all parameters set to one
waveform will be copied to the other one and
vice-versa.
Note
Tracking mode cannot be used together with the
Frequency or Amplitude Coupling. Setting the Tracking
mode to ON will disable any Coupling settings.
Frequency
coupling
4. From the side menu press Freq Cpl
5. Press Freq Cpl Type to
set the type of
frequency coupling.
Freq Cpl Type:
OFF, Offset, Ratio
Frequency from both generated waveforms can
be coupled with a fixed offset or with a constant
ratio.
6. Select Offset from the Freq Cpl Type
menu and press Offset on the side
menu to configure the offset of the
frequency coupling.