GW Instek MSO-2000EA - Page 162

MSO-2000E & 2000EA User Manual
162
4. Select Delay from the side menu.
The delay trigger indicator appears
at the bottom of the display.
From left: Delay trigger indicator (D),
edge trigger (A), edge slope, edge level, edge
coupling, delay trigger (B), delay slope, delay
trigger level, delay coupling.
5. To set the delay source, press
Source and select a source from the
side menu.
Source
CH1 ~ CH4, AC Line, EXT*
*2 channel models only.
6. Press Coupling from the bottom
bezel menu to select the trigger
coupling or frequency filter
settings.
Choose the coupling from the side menu.
Range
DC, AC, HF Reject, LF Reject
7. To set the delay press Delay from
the bottom bezel.