GW Instek MSO-2000EA - Page 160

MSO-2000E & 2000EA User Manual
160
Range
Channel 1 ~ 4 (Alternate On/Off),
EXT (Ext Probe: Volt/Current,
Attenuation: 1mX~1kX, CH2
models only), AC Line, D0 ~ D15.
6. Press Coupling from the bottom
bezel menu to select the trigger
coupling or frequency filter
settings.
Choose the coupling from the side menu.
Range
DC, AC, HF Reject, LF Reject
7. Toggle Noise Rejection On or Off
from the side menu.
Range
On, Off
8. From the bottom menu press Slope
to toggle the slope type.
Range
Rising edge, falling edge, either
9. To set the external trigger level,
select Level from the bottom bezel
menu (Not applicable for AC line
source).