MSO-2000E & 2000EA User Manual
178
4. Press Others from the side
menu and select Bus.
The Trigger on settings will be reflected on the
Trigger Configuration icon.
From left: Bus trigger, Trigger source
5. Press Trigger On and select the
triggering condition for the SPI
bus.
SS Active, MOSI, MISO,
MOSI&MISO
If MOSI, MISO or MISO/MOSI was
configured for the Trigger On setting, then the
number of words and the data can be
configured.
6. Press Data from the bottom menu.
7. Press Number of Words from the
side menu and choose the number
of words for the data.
To Next Page
Loading...
