GW Instek MSO-2000EA - Page 186

MSO-2000E & 2000EA User Manual
186
From left: Bits D15~D0
4. Press Define inputs from the
bottom menu.
5. Press Select on
the side menu
and select a
channel.
6. Next, select a
logic level for
the selected
channel, or set
the selected
channel as the
clock signal.
Logic
Clock, High (H), Low (L), Don’t
Care (X)
7. Repeat steps 5 to 6 for the remaining channels.
8. The chosen logic levels will be reflected in the
trigger indicator at the bottom of the screen.
The color of each channel, if active will also be
displayed. If a channel is not turned on, it will
be grayed-out (see page 208 to turn the digital
channels on or off in the Logic Analyzer menu).
Example
D15 ~ D0
D0 clock edge
D1 = High
D2 = don’t care
D3 = don’t care
D15 ~ D4 = turned off