Note: If the Variable knob cannot select a channel,
press the Select key to toggle the scope into 'LA
Select mode'.
3. Press the Select key. The mode
toggles from 'LA Select mode' to
'LA Move mode'.
A message will indicate which
mode is currently active.
The Move mode is used to move the digital
channel position on the graticule as well as to
group the channels. If you turned on all the
digital channels, you will notice that they are
already grouped as a single group.
You can tell when it is in move mode as the
selected channel/group flashes and the labels
for the other channels/groups become grayed
out.
To Next Page
Loading...
