GW Instek MSO-2000EA - Page 228

MSO-2000E & 2000EA User Manual
228
4. Use the Left and Right arrow keys
to select a base unit and use the
variable knob to increase the
amplitude by that base unit, as
shown in the Amplitude window.
5. Default can be pressed to set the
amplitude to 1.00Vpp.
6. Press Go Back to leave the menu.
Range
10mVpp to 2.5Vpp (Load:50Ω)
20mVpp to 5Vpp (Load: High Z)
Default
1.00Vpp
Set the Offset
7. Press Offset to set the offset of the
waveform.