GW Instek MSO-2000EA - Page 246

MSO-2000E & 2000EA User Manual
246
Scale
0.1x ~ 10X
b. Press Go Back to go back to the
previous menu.
Copy/Paste:
a. Press Start to set the start
point of the section you want
to copy.
b. Press Length to set the size of
the section you want to copy
from the start point.
The copied section will be
shown as a grey box on the
display
Start
1 ~ user-defined point position
Length
1 ~ user defined point length
c. Press Paste To to choose where
the selected section is copied
to.
Paste To
1 ~ user defined point position
d. Press Preview. The desired edit
will then be previewed on the
screen. The pasted section will
be shown as a yellow box on
the screen.
e. Press Done to confirm the edit,
or press Undo to cancel.