GW Instek MSO-2000EA - Page 248

MSO-2000E & 2000EA User Manual
248
Press GEN1 Setup or GEN2 Setup
for generator 1 or generator 2,
respectively.
Press Waveform from the bottom
menu.
Select Arbitrary from the side menu.
2. Press Waveform Edit from the
bottom menu.
3. From the bottom menu select Load
Waveform.
4. To load a file from one
of the internal memory
slots, press From to
choose the ARB
waveform to load:
ARB:
Arb1, Arb2, Arb3, Arb4
5. To load a file from an external USB
or from the internal flash memory,
press From File.
The last file that was saved to USB
or the internal flash memory will
be displayed in the icon.
6. To recall the displayed file, press
Recall Now.
7. Alternatively, press File Utilities.