15 4000670450 E 04.19 USA / GB
3632T - HTT13
A
- Foreword
2.1.5 - Explosion / Fire Hazards
2.1.6 - Crushing / Collision Hazards
• Always cordon off the area around the base of the machine to keep personnel and other
equipment away from the machine while in use.
• Warn personnel not to work, stand, or walk under a raised boom/platform.
• Do not drive in reverse direction (opposite the field of vision).
• Be aware of the boom position and tail swing when rotating the turret (turntable).
• Always ensure that the chassis is never driven any closer than 1 m (3 ft 3 in) to holes,
bumps, slopes, obstructions, debris and ground coverings that may hide holes and other
dangers.
• Keep non-operating personnel at least 5 m (16 ft 5 in) away from the machine when driving
and slewing.
Always wear protective clothing and eye wear when working with
batteries and power sources/systems.
N.B.-:-A
CID IS NEUTRALIZED WITH SODIUM BICARBONATE AND
WATER
.
• Do not start the engine if you smell or detect liquid propane gas
(LPG), gasoline, diesel fuel or other explosive substances.
• Do not work on or operate a machine in an explosive or
flammable atmosphere / environment.
• Do not touch hot components.
• Do not bridge the battery terminals with metallic objects.
• Do not service the battery in proximity of spark, open flame, lit
cigarettes.
• Do not fill up the fuel tank, when the engine is running and/or
near a flame.
• Avoid contact with battery acid. Battery acid causes serious
burns and should be kept away from skin or eyes. If contact
occurs, flush with water and consult a physician immediately.
When in the platform :
• Check the work area for clearance overhead, beside and
below the platform when lifting and lowering the platform.
• During movement, keep all the parts of the body inside the
platform. Hold onto the guardrails on the opposite side to any
surrounding structures. Take care to avoid trapping hands
whilst holding the guardrails.
• Ensure there are no obstacles (structure) in the work area.
To Next Page
Loading...
