Haulotte HTT13 - Drive and Set; Drive and Set Safety

92 4000670450 E 04.19 USA / GB
E - General Specifications
3632T - HTT13
5.2 - DRIVE AND SET
The Drive and Set Option allows the operator to drive the aerial work platform over a short
distance on ground level, deploy, retract and level the outriggers from the platform (upper)
control box. The platform (upper) control box, which has additional controls added, is used to
control all boom motions, as well as all Drive and Set functions. The platform (upper) control
box is activated by turning the KEY SWITCH ( 1 ) at the ground (lower) control box, clockwise
to the PLATFORM ( 1b ) icon and entering the platform using a 3 point contact (both hands
and one foot).
5.2.1 - Drive and set safety
• NEVER drive the aerial work platform without the platform and boom fully lowered, and the
outriggers fully retracted in the "stowed" (upright) position.
• NEVER drive the aerial work platform without the operator fully secured inside the platform.
• NEVER operate the Drive function on grades exceeding 4.5 °. This optional feature is
intended to help reposition the aerial work platform, by driving short distances only on a level
ground.
• NEVER operate the aerial work platform with more than 1 person in the platform.
• ALWAYS watch for personnel and obstructions in the path of the machine. Be aware of
limited visibility and blind spots.