53 4000670450 E 04.19 USA / GB
C
- Pre-operation inspection
3632T - HTT13
Presence of securely fitted maintenance devices (safety stand)
All compartments covers open and lock properly
Frame, axle, steering system, stabilizers arms ...
Absence of cracks, broken parts, damaged paint
No deterioration and visible damage
No screws missing / loose parts
No foreign body in joints or slides
Condition of tires/tyres (wear, cutting, damage ...)
Wheel reducer is undamaged and operates smoothly
All compartments covers open and lock properly
Rotation system : orientation turret, basket and jib
Absence of cracks, broken parts, damaged paint
No deterioration and visible damage
No screws missing / loose parts
No foreign body in joints or slides
Exterior gear wheel greasing
Pin, pin stop, bearing ...
Presence of the turret pin and its locking device
No bent, cracked or broken pins, pin stops, bushes or bearings
Pulleys, chains and wire rope
No cracked or broken chains, links and fittings
Pulleys and clamps are not worn, rusted or damaged
Cylinder and hydraulic component : pumps, filters, manifold
No leaks on the pump, tank or fittings
No deformation, visible damage, broken weld or leaks on
hydraulic cylinder
No screws missing / loose parts
Presence and operation of hydraulic filter (no clogged)
Check hydraulic oil level is above the minimum level (Machine
folded)
Energy storage and motorisation: tanks, batteries and engine
Engine oil level (add in stowed position)
Fuel level (add in stowed position)
No screws missing / loose parts
Presence and good condition of hydraulic hose
Presence and good condition of engine components
Presence and good condition of the batteries: terminations and
clamps, electrolyte level ...
To Next Page
Loading...
