94 4000670450 E 04.19 USA / GB
E
- General Specifications
3632T - HTT13
5 - 7 Outrigger controls
• The outrigger ENABLE ( 5 ) button works in tandem with both the
outrigger RETRACT ( 6 ) button and the outrigger EXTEND ( 7 ) button.
• Pressing (pushing) in and holding the ENABLE ( 5 ) button while
pressing (pushing) in on the RETRACT ( 6 ) button fully retracts all 4
outriggers simultaneously.
• Pressing (pushing) in and holding the ENABLE ( 5 ) button while
pressing (pushing) in on the EXTEND ( 7 ) button fully deploys all 4
outriggers simultaneously.
1
.
8 Platform position LED
When the PLATFORM POSITION LED ( 8 ) is flashing, the boom must
be fully retracted and in the "stowed" position before resuming outrigger
control or drive and set operations.
1. The outriggers can be deployed and / or retracted from either the ground (lower) or platform (upper) control
bo
x on aerial work platforms with the Drive and Set Option
Marking Description Function
To Next Page
Loading...
