HEIDENHAIN TNC 370 - 11.7 Code Numbers; 11.8 NC and PLC Software Numbers, Free Memory

11 MOD Functions
L
.
11.7 Code Numbers
The TNC asks for a code number before allowing access to certain
functions:
Funtiion
Wisp number
Cancel erase/edit protection (status P) 86357
Select user parameters 123
Timers for:
Control ON
Program run
Swindle ON 857282
Code numbers are entered in the dialog field after the corresponding
MOD function is selected.
11.8 NC and PLC Software Numbers, Free Memory
Select this MOD function to see the software numbers of the NC and
PLC, and the amount of free memory (in number of characters).
L
TNC 370
11-7