12 Tables, Overviews and Dialogs
L
12.5 TNC Error Messages
The TNC automatically generates error messages when it detects
problems such as
l
Incorrect data input
l
Logical errors in the program
l
Contour elements that are impossible to machine
l
Incorrect use of the touch probe system
An error message containing a program block number was caused by an
error in that block or in the preceding block. To clear a TNC error
message, first correct the error and then press the CE key.
Some of the more frequent TNC error messages are explained in the
following list.
TNC error messages during programming
ENTRY VALUE lrwORREcT
_1
‘-
.-
l
Enter a correct label number
l
Observe the input limits
The external device is not correctly connected.
Erase some old files to make room for new ones.
JUlhSPTOLARRLONOTPIElRMITTED
1
Do not program CALL LBL 0.
Label numbers can only be assigned once
L
TNC 370
12-17
To Next Page
Loading...
