HEIDENHAIN TNC 370 - Incremental Jog Positioning; Positioning with Manual Data Input

2
Manual Operation and Setup
2.1 Moving the Machine Axes
Incremental jog positioning
With incremental jog positioning, a machine axis will move by a preset
increment each time you press the corresponding machine axis direction
key
Fig. 2.3: Incremental jog positioning in the
X axis
INCRE- ON
‘: 0
MENT m
Select incremental jog positioning with the INCREMENT soft key.
J
r -3
JuE~INcm 4
8
c e.g.Om
I
Enter the jog increment, for example 8 mm, or
_--____________--_-__-__---_-_--_-
I\
I I
e.g.
Set the jog increment with the soft keys, for example 1 mm.
I
I
I
I
e.g. X-i-
0
Press the machine axis direction key as often as desired.
CL
Press the INCREMENT soft key again to switch off incremental jog
positioning.
Positioning with manual data input
Page 5-57 describes positioning by manually entering the target coordi-
nates for the tool.
2-4
TNC 370