12 Tables, Overviews and Dialogs
12.4 Features, Specifications and Accessories
Description
Contouring control for up to four axes,
with oriented swindle stop
Components
Logic unit, TE 370 or TE 371 keyboard,
monochrome flat luminescent screen with
soft kevs
Data interface
RS-232-C / V.24
Simultaneous axis control
for contour elements
Straight lines: up to 4 axes
Circles: up to 2 axes
Helices: 3 axes
Background programming For editing one part program while the
TNC is running another (not available with
FK free contour programming)
Test run
Internally and with test run graphics
Program types
HEIDENHAIN conversational format
IS0 programs
Tool table (program TO0L.T)
Pocket table (program TOOLP.TCH)
Program memory
Battery-buffered for up to 64 programs
Capacity: approximately 5000 program
blocks (depending on the block lengths)
Tool definitions
Up to 254 tools in one program or up to
99 tools in TO0L.T
TNC spe&icationd
Block processing time
10 ms per block (three-dimensional
straight line without radius compensation)
Control loop cycle time
Data transfer rate
6ms
Max. 115 200 baud
Ambient temperature
Operation: 0” to 45” C (32” to 113” F)
Storage: -30” to 70” C (-22” to 158” F)
Traverse
Traversing speed
Max. f 100 m (2540 in.)
Max. 300 m/min (11 811 ipm)
Spindle speed
Input range
Max. 99 999 rpm
As fine as 1 urn (0.0001 in.) or 0.001”
d
4
4
12-14
TNC 370
To Next Page
Loading...
