HEIDENHAIN TNC 370 - Page 56

1
Introduction
L
1.6 Programs
Selecting, protecting, copying, renaming and erasing programs
To select a program
,
Call program management.
c
/
r
1
FILE NAME =
,
I
0 Or 0
Use cursor keys to select the program.
_------_---_.-------------------------
Enter the desired program name, for example 15.
Confirm your selection.
To protect a program
IB
Call program management.
I
1
FILE NAME =
c
2
0 Or 0
Use cursor keys to select the program.
I-
PROTECT’ \
IJNPROTECT /’
Protect the program.
The program protection is then indicated with a P.
To remove edit protection
,
Call program management.
L
/
f
FILE NAME =
i
I
0 Or 0
Use cursor keys to select the program.
Press the soft key to remove protection.
c
J
/
-3
CODE PiUMBER E
c
,
Enter the code number 86357 and confirm with ENT. The file
protection is removed, the “P” disappears.
L
TNC 370
1-37