3 Test Run and Program Run
L
3.4 Skipping Blocks During Program Run/Test Run
Blocks that were programmed with a “/’ sign can be ignored during a
program run or test run.
PRQWAM RUN f FULL SEQXIENCE
Select the part program.
\
or
TEST lWN
J
\
Set the soft key to OFF to execute programs with the ‘I/” blocks, or
set the soft key to ON to execute programs without the “/” blocks.
&
This function is not effective with TOOL DEF blocks.
- 3.5 Optional Interruption of a Program Run
The TNC interrupts the program run at blocks programmed with MO1 if
the soft key function “Optional Stop” is set to ON.
Select the part program.
Set the soft key to OFF to disable program run interruption at MOI, or
set the soft key to ON for program run interruption at MO1
-
TNC 370
3-7
To Next Page
Loading...
