H E Y E R P a s i t h e c
Rev. 0.2 Draft – 12/09 HEYER Pasithec, Operator’s manual 31 / 106
Gas Sensor
When the gas sensor is in “Enabled” mode, the sensor was properly connected to the machine and
can be used.
When the gas sensor is in “Disabled” mode, it was not properly connected prior to starting the
machine and cannot be used.
The Gas Sensor settings can be adjusted by following these instructions:
Step 1: Turn the knob to select “Gas Sensor.”
Step 2: Press the knob, and then turn it to change the settings.
To Next Page
Loading...
