Need help?Do you have a question about the HIKVISION AE-MD5043 and is the answer not in the manual?
General| Audio Bitrate | 64 Kbps |
|---|---|
| Working Humidity | 10% to 90% |
| Encoding Resolution | 1080p/720p/4CIF/CIF/QCIF |
| Video Output | 1 channel HDMI, 1 channel VGA |
| Audio Output | 1 channel |
| Audio Compression | G.711u |
| Hard Drive | 1 SATA interface |
| Network Interface | 1 RJ45 10M/100Mbps self-adaptive Ethernet interface |
| USB Interface | 2 USB 2.0 interfaces |
| Power Supply | DC 12V |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Recording Resolution | 1080p/720p/4CIF/DCIF/2CIF/CIF/QCIF |
| Video Input | 4 channels |
| Video Compression | H.264 |
| Video Bitrate | 32 Kbps to 6 Mbps |
| Max. Channel Capacity | 4 channels |
Essential guidelines for safe installation, operation, and handling of the device.
Highlights the main functionalities and unique selling points of the device.
Step-by-step guide to activate the recorder using various methods like SADP, Web, or local menu.
Guides on formatting storage, setting up continuous/event recording, and capturing images/videos.
Configuration for establishing a cellular (3G/4G) network connection for the device.
Steps to configure and connect the device to a wireless network.
Connecting the device to surveillance platforms like Ehome or Guarding Vision for remote access.
Features for viewing camera feeds, including start/stop, split screen, manual capture, and channel-zero.
Configuring and controlling Pan-Tilt-Zoom (PTZ) cameras connected to the device.
Setting up GPS for device positioning and speed limit alarms.
Configuring acceleration detection and alarm triggers based on G-sensor data.
Adjusting video and audio encoding settings for optimal quality and bandwidth usage.
Adjusting image parameters like brightness, contrast, and mirror type.
Enabling and configuring driver behavior analysis like smoking or fatigue detection.
Setting up motion detection parameters and linked actions.
Configuring alarms for when the camera view is obstructed or tampered with.
Adding, deleting, and modifying user accounts and their permissions.
Operating IP cameras directly via the recorder's local menu interface.
To Next Page